Description
Compressed air is known as the "fourth resource" — just like electricity or water, it is an important resource in all areas of industrial production, necessary to keep production lines running.
When air is initially drawn into the compressor, it often contains pollutants, dirt particles, and water vapor, which condenses into liquid water when the air is compressed. These impurities can cause disruptions in your operation, resulting in significant but avoidable costs. To avoid costly production downtime, the compressed air must be oil-free, clean and dry. An efficient and intelligent air supply solution is more than just a line of high-quality compressors. It is a combination of experience in air production, filtration, drying, compressed air storage, condensation management and purification.
Full range of air purification systems
Champion's complete compressed air systems include not only air compression kits, but also a full range of air purification systems, including:
- Filters
- Refrigerating dryers
- Adsorption dryers
- Condensate outlets
- Oil/Water separators
- Condensate separators
- Pressure vessels
- Activated Carbon Towers
- Nitrogen Generators
Filters
Compressed air filters are used for highly efficient removal of solid particles, water, oil aerosols, hydrocarbons, odors and vapors from compressed air systems. To ensure the required compressed air quality, an appropriate filter element must be installed in the filter housing.
Reefer dehumidifiers
Installed to reduce or remove condensate from compressed air, reefer dehumidifiers are essential for the health and performance of the compressed air network. The main function of any dryer is to improve air quality, although modern requirements mean that this performance should not be achieved at the expense of energy efficiency.
Adsorption dryers
Champion offers a wide range of adsorption dryer technologies, each of which is designed to meet the specific needs of the user and provides dew point values up to -70 degrees. At the heart of any smart air supply solution is a dehumidifier used to remove water vapor, stop condensation, and prevent corrosion. Adsorption dryers additionally inhibit the growth of microorganisms
Condensate drains
Drains are required on all separators, filters, dehumidifiers and receivers to remove liquid condensate from the compressed air system. Faulty drains can cause accumulations of moisture to flow downstream, which can overload the dehumidifier and damage the end equipment. Champion offers a complete range of condensate drain systems, including zero-loss ones, which contributes to overall significant energy savings.
Oil / Water separators
Local environmental laws and regulations state that condensate drained from compressed air systems cannot be returned to the sewer system due to the compressor's lubricating oil content. Water-oil separators are one of the most efficient and cost-effective solutions. The multi-stage separation process using oleophilic filters and activated carbon ensures exceptional productivity and trouble-free operation.
Condensate separators
Cyclone condensate separators use centrifugal motion to displace liquid water from compressed air. Rotation causes condensate to pool on the walls of the centrifugal separators when the condensate gains enough mass to be collected and removed from the grid.
Pressure vessels
The pressure vessel plays a very important role in the compressed air system, providing a place for free water and grease to settle out of the compressed air stream, meeting peak storage air needs, reducing the frequency of load/discharge or start/stop cycles, and helping with better compressor control for more stable system pressure.
Activated Carbon Towers
Activated carbon towers remove hydrocarbon vapors and odors from compressed air. The towers are filled with activated carbon adsorbent, which adsorbs dirt on the surface of their internal pores. Activated carbon towers are used where the oil vapor content needs to be minimized.
Nitrogen Generators
Nitrogen generators extract available nitrogen from the surrounding air from other gases using variable pressure adsorption (PSA) technology. During the PSA process, compressed purified ambient air is fed into a molecular sieve bed, which allows nitrogen to pass through as a product gas, but adsorbs other gases.
Other products in the Champion product line include:
- Membrane dryers
- Aftercoolers
- Differential pressure indicators and accessories
- Heat recovery systems
- Breathing filter packs
- Paint systems
- Aftercoolers
